Product Detail

40MHz Dual Trace - S1345 by Elenco

Quick Overview
40MHz Dual Trace - S1345 by Elenco 1mV/DIV Sensitivity. Variable Hold Off X-Y Operation TV Sync. Beam Finder Sweep Mix Z Modulation Component Tester (Max test voltage 8.6 Vrms on...
Title

₹. 77,490.00

Add to Wishlist

40MHz Dual Trace - S1345 by Elenco

    • 1mV/DIV Sensitivity.
    • Variable Hold Off
    • X-Y Operation
    • TV Sync.
    • Beam Finder
    • Sweep Mix
    • Z Modulation
    • Component Tester
    • (Max test voltage 8.6 Vrms on open circuit; Max test current 11ma shorted; TESTS: line frequency; capacitors; inductors; diodes; transistors ; zener etc.)
    • (Max test voltage 8.6 Vrms on open circuit; Max test current 11ma shorted; TESTS: line frequency; capacitors; inductors; diodes; transistors ; zener etc.)
    • 2 FREE probes (x1 & x10) included.
    Detailed specifications:
    Vertical Amplifiers(CH1 and CH2) Trigger

    Sensitivity:
    5mV/div - 5V/div(x1 mode)
    1mV/div - 1V/div(6Mhz, -3dB) (x5 mode)

    Trigger Coupling: AUTO, NORM, TV-V, TV-H
    Trigger Source: CH 1, CH 2, ALT, LINE, EXT
    Attenuator:
    1-2-5 sequences, 10-step attenuator, plus vernier control
    Slope: ±
    Trigger Sensitivity
    Rise Time: About 8.8ns Coupling Bandwidth Internal External
    Over Shoot: Less than 5% TV-V DC - 1kHz 1.0 div 0.1Vpp
    Input Impedance: 1MΩ ±2%, 25pf ±10pF TV-H 1kHz - 100kHz 1.0 div 0.1Vpp
    Max. Input Voltage: 400V (DC + AC peak) AUTO 100Hz - 40MHz 1.5 div 0.1Vpp
    Operating Modes:
    CH 1, CH 2, Dual(ALT or CHOP), and ADD
    NORM 100Hz - 40MHz 1.5 div 0.1Vpp
    Component Tester
    Chop Frequency: Approximately 500kHz Test Voltage: Max. 6Vrms (open circuit)
    Algebraic addition: CH 1 + CH 2, CH 1 - CH 2 Test Current: Max. 11mA (shorted)
    Inverter: CH 2 only Test Frequency: Line Frequency
    Horizontal Amplifier Components: Capcitors, inductors, diode, transistor, zener, etc.
    X-Y mode: Switch selectable using X-Y switch
    CH 1: X-axis
    CH 2: Y-axis
    CH 2 Output
    Output Level: 100mV/div (no lead) 50mV/div (50Ω lead)
    Accuracy: Y-axis ±3%, X-axis ±6% Bandwidth: 20Hz - 20MHz (-3dB)
    Bandwidth: DC - 1MHz(-3dB) Other Specifications
    X-Y phase difference: Approximately 3º at 50kHz. CRT: TYPE: Rectanglular with internal graticule. Adjustable graticule illumination
    Sweep System Display Area: 8 x 10 div (1 div = 1 cm)
    Sweep Display Mode: Main, Mix, Delay Accelerating Voltage: 12kV
    Hold Off Time: 5:1 continuously variable(0.1µs/div) Phosphor: P31
    Main Sweep Z Modulation: Positive TTL signal, low level blank intensity at any intensity, high level unblank any intensity.
    Sweep Speed: Trace Rotation: Adjustable front panel
    0.1µs/div - 2s/div in 1-2-5 sequence 23 steps Calibrator: Square wave 1kHz, 2Vpp ±3%
    Accuracy: ±3% Power Requirements:115, 223VAC ±10%, 50/60Hz
    Variable Time Control:5:1, uncalibrated, continuously variable between steps. Power Consumption: Approximately 40 watts
    Sweep Magnification:
    10X, ±10%, extend sweep speed up to 10ns/div
    Supplied Accessories:Two x1, x10 probes, scematic diagram & parts list, AC Power cord, spare fuse and dust cover
    Delayed Sweep  
    Sweep Speed:0.1µs/div - 2s/div in 1-2-5 sequence 23 steps
    Accuracy: ±3%
    Sweep Magnification: 10X, ±10%, extend sweep speed up to 10ns/div
    Delay Time Position:Variable control to locate desirable waveform for extending

     

    This product will be shipped in 45 days